Cambridge pavers are built to be sealed, and it shows the day it is done: the color comes back like rain just fell and stays that way, the joint sand locks in place, and stains stop soaking in. Popeye’s Power Washing seals paver patios, walkways, pool decks, and driveways across Suffolk & Nassau, with protection that holds 3 to 5 years per application.
If the patio was worth installing, it is worth sealing. An unsealed paver surface on Long Island loses its joint sand to rain and sprinklers, fades a shade every summer, and drinks in every oil drip and leaf stain. Sealing reverses the equation: the sand locks, the color returns and holds, and stains sit on top instead of soaking in. One professional application protects for 3 to 5 years, and the patio spends those years looking like the installer just left instead of aging toward a restoration bill.
What Sealing Does
The sealer penetrates and binds the joint sand, so it stops washing onto the lawn, weeds and ants lose their home, and the field stays locked tight against shifting.
The wet-look finish deepens the reds, charcoals, and tans the way rain does, permanently. It is the “day it was installed” color, back and held there.
Oil, rust, leaf tannin, and spilled wine sit on the sealed surface instead of soaking into the pores, and the next wash rinses off easy instead of fighting set-in stains.
Your Finish
Same protection underneath, three different looks on top. We sample a hidden corner before you commit.
Full sand-lock and stain protection with no visible change. The pavers just stay clean and stay put.
Deepens the color the way rain does with a soft sheen. The finish most Cambridge owners choose, because it is the color they bought.
The richest color and strongest sheen, popular on showpiece patios and pool surrounds. Grip additive available where feet land wet.
The Quiet Failure
The sand between your pavers is structural. It locks the field together and spreads every footstep and tire load across the surface. And on an unsealed patio it is always leaving: rain washes it out, sprinklers carve it, ants excavate it, and every year the joints sit a little lower.
Low joints are where the trouble starts. Weeds root, edges loosen, pavers rock and settle unevenly, and the repair bill for a shifting patio makes sealing look like pocket change. Sealing over fresh, topped-up polymeric sand freezes that countdown: the sand binds, the joints stay full, and the field stays exactly where the installer left it.
Done In Order
“We put real money into our Cambridge patio five years ago and watched it fade every summer since. One day of sealing and it looks better than the brochure. Should have done it years ago.”
Answers
If you want the patio to look the way it did at installation, yes. Sealing locks the joint sand against washout, restores and holds the color, and blocks the stains that soak into unsealed pavers. One application protects for 3 to 5 years, a fraction of what fading and joint failure cost to reverse later.
Three: natural, which protects with no visible change; satin wet look, which deepens color the way rain does and is the most popular choice for Cambridge pavers; and high gloss, which maximizes color depth and sheen. We show samples on your own pavers before you choose.
Yes, and it is half the reason to seal. The sealer penetrates the joint sand and binds it, so it stops washing out, weeds and ants lose their foothold, and the pavers stay locked against shifting. Joints are topped up before sealing so they bind full.
60 to 90 days. New pavers push natural efflorescence to the surface as they cure, and sealing too early traps that mineral haze under the coating permanently. Once it has risen and been washed off, the pavers are ready.
The surface needs roughly 24 rain-free hours after application, which is why we schedule sealing against the forecast and will move your date rather than gamble a coat. Foot traffic after about 24 hours, vehicles after 72 on driveways.
Yes. A cured sealer is not a soft film, and normal shoveling and plowing with a polyurethane edge do not damage it. The sealer actually helps in winter by keeping salt and melt water out of the pavers.
Typically two: a first coat that penetrates and binds the sand, and a second that builds the finish. Single heavy coats are how DIY jobs end up blotchy, because the sealer puddles instead of absorbing evenly.
The white haze or old coating gets locked under the new coat and shows through permanently. That is why our process cleans first, treats efflorescence, strips failing sealer where needed, and dries fully before anything goes down.
Every 3 to 5 years for patios and walkways, closer to 3 for pool decks and driveways in full sun or heavy traffic. When water stops beading on the surface, it is time.
Pricing depends on square footage, joint condition, the finish you choose, and whether old sealer needs stripping. Every estimate is free and no-obligation. Call (631) 620-2499 and we will quote the complete job in writing.
Where We Work
Based in Holbrook and serving homeowners throughout Suffolk & Nassau:
Call Us For a Free Appointment Today and Receive Your 20% Discount on All Services
Free, no-obligation estimate. Open Mon-Sun, 10am-7pm.
Call Now & Save 20% (631) 620-2499